Skip to main content
Lasergarden Rentals

Laser Subrental FAQs

This page is for Laser Professionals Only!

Almost before we knew it, we had left the ground. All their equipment and instruments are alive.Mist enveloped the ship three hours out from port. The spectacle before us was indeed sublime.A red flair silhouetted the jagged edge of a wing.

Required Documentation

We need to receive:

  • A copy of your active laser variance
  • A valid driver's license
  • Proof of laser rental insurance covering loss, damage, and theft


Equipment Requirements

You will need:

  • A Windows computer running Pangolin's QuickShow (free) or Beyond software
  • Speaker stands, truss, or another secure mounting location that is at least 10 feet above the floor of any area accessible to the audience
  • For live performances, a compatible show controller such as the Akai APC40 or similar MIDI controller


The process usually takes a minimum of 30+ days. Reach out and we can coordinate filing your variance with the CDRH for a $200 fee.

Rental time is calculated by the amount of time any gear is out of our possession. For example, if you only need lasers for a 3 day weekend, but they take 2 days to ship each way, this would be a 1 week rental. 

We recommend booking as early as possible, especially for weekends, holidays, festivals, and peak event seasons. Lasers are not considered reserved until 100% of the rental rate is paid, and we have all necessary documents from you.

Only lasers marked "IP65" can be used outdoors. No exceptions. 

We can send you cables too. 


For FB3 Lasers, you can rent looms with a DMX E-stop cable + ILDA cable. Power cables are usually run separately.

For FB4 Lasers, you can rent a looms with DMX E-stop cable + Ethernet cable + True1 power cable


We'll send everything you need to run a show (except laptop and stands) if needed. 

All lasers are shipped with:

  • Trigger clamp
  • Safety cable
  • Emergency stop (E-Stop)
  • Safety key

Get Started Now